Do you know where your septic tank is? Okay, so you can point to an area on your property and say “yeah, it’s there” with a hint of un-sureness. The next question for you is most likely more valuable then the one just asked. Do you know where the cover to your septic tank is? Does that have you scratching your head?
Septic tanks by their very nature are buried, sometimes 3 feet or deeper underground. From sight from mind as it were. But that’s not always the best thing. There will come a time when your septic system actually starts to exhibit problems and requires some maintenance/repairs and also the tank must be pumped out. Having a general idea about the location of the tank can make getting this simple task done a lot more difficult.
The two main ways to cope with this challenge and something way to make certain that down the road it won’t be a concern. First let’s look at choosing the lid to the septic tank if you don’t know where it is. You can either dig for it yourself or hold the septic pumping service practice it. Performing it your self can be time-consuming and very little fun. Obtaining the pumping service practice it can be costly.
Generally it is actually carried out in this fashion. You or someone you hire has to dig down until they get the top of the septic tank. That is often the easy portion of the process. Once you see the top in the tank you then must find the lid. This can involve digging concentric circles outward from your initial hole until you find the lid. Once you see the lid the time has come to fix the problem; install a riser.
A septic tank riser is basically a big tube that extends from the lid in the tank as much as the surface of the ground. Once installed it can provide quick accessibility septic tank that’s simple to find any time there exists a problem or it needs to be pumped out.
You can find three basic kinds of risers to select from; concrete, PVC, and polyethylene.
While concrete risers are generally cheaper it isn’t the best option. A concrete riser is heavy and may need heavy equipment to lift and install it. It is additionally more apt to leak then this other materials and may have rust problems if rebar is used to strengthen the cement.
PVC and polyethylene risers are lightweight as well as simple to set up. They are immune to corrosion not to mention is not going to rust. In addition they add a gasket seal to maintain water from entering preventing sewer gases from escaping coming from a leaky lid. The increased expense of these two types of risers is well worth it. They are virtually maintenance free and definately will easily last for your life of the whole septic system.
Every septic tank needs a riser and in a multitude of locations they are now a code requirement. Should you don’t have one it might be worth having one installed before something goes completely wrong along with your septic system. Quick access to the tank is one of bawvgx first steps to diagnosing any problems.
A properly designed septic system will keep maintenance issues and problems to a minimum. In case you are considering installing or replacing a septic system the local septic tank pumping service can point you inside the right direction. To understand more about septic tank pumping and design please click this link.